No Waterfall on MAC, can see rx Latency and loss numbers counting upwards

1

No Waterfall on MAC, can see rx Latency and loss numbers counting upwards.
Settings
1 Mac mini (M1) running Big Sur.
Icom 9700
BOTH Computer and radio hard wired into router.
Verified IP of Radio.
Verified Radio Control Port User Name and Password

Startup steps

  1. Start Program --No issues
  2. Click on settings
  3. Click on Connect—latency and drop numbers start
  4. Click on View- NO waterfall displayed. (latency and drop numbers continue)
    Looking for assistance on a configuration that will display the waterfall. Any thoughts or ideas? Thanks Jim KK4TW
    IMG_0210
    IMG_02101920×1440 288 KB

    IMG_0211
    IMG_02111920×1440 263 KB
2

did you push power on at the first tab? (and be aware of that the rig should be in stby)
normally there should not be a reason to push “connect” as it will connect automagically.
(else: Phil can drop in here)

3

Hi Jim.

That looks like the Rig model isn’t being detected, most likely C-IV Transceive mode is disabled in the rig? Getting Started | wfview

73 Phil M0VSE

4

Also it is worth using the latest version 1.2c, not least because that is signed and notarised by Apple!

73 Phil

5

Thanks for the information. The CIV Transceive was OFF. Everything seems good now.

Jim