Remote test for 7300: different remote CI-V logged

1

Hi. Testing wfview 1.0 (win 7) remote over the internet through firewall (port forward config 3 udp ports) to a wfview with usb to IC-7300 (adr :94) was mostly a great success - we are impressed!

  1. We found very many “Detected different CI-V: e0” and similar in the rig wfview log. Is that expected or an error?
2021-06-29 16:55:10.385 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:10.394 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:10.403 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:10.485 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:10.634 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:10.667 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:10.671 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:10.764 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:10.946 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:10.952 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:10.965 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:11.045 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:11.240 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:11.326 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:11.506 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:11.513 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:12.066 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:12.077 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1
2021-06-29 16:55:12.091 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e0
2021-06-29 16:55:12.176 INF udp.server: "::ffff:92.32.xxx.xx" : Detected different remote CI-V: e1

  1. Bitrate was abt 1 Mbit/s into master wfview and 3 Mbit up from master wfview to rig wfview. Why so much up?

  2. If (when :wink: wfview crashes, do you want logs sent to you?

  3. Since we think of writing an article in a ham magazine, we might come back with more questions. How do you want such communication?

73 de SA7CND

2

Hi Poul,

I assume that you had some software connected over virtual serial port on the remote device, that log message was an attempt to control what traffic is being passed to the remote. It shouldn’t appear in the upcoming 1.1 release (which incidentally has many fixes for the server side).

Not sure why you are seeing such difference in bitrate, what audio codecs did you have selected? For this application I have been testing the Opus codec and from my tests, bandwidth usage is reduced by 90% with no obvious loss of quality. Obviously, this will only work when using a wfview->wfview connection as connecting direct to rigs that have an Ethernet or Wifi connection, you are limited to the Codecs that the rig supports.

If you are running in debug mode (-d command line switch) then yes a log could be useful but there are a number of crashes that we have already fixed.

As for further questions, you can either post them here or DM me, Elliott or Roeland.

73 Phil M0VSE